Changes

== PART 1: Connecting the Cam to a Windows PC ==

* the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)* connect cam directly via ethernet cable with pc, no internet needed* set your IP v4 address to '''192.168.0.10 ''' (gateway doesnt matter, set it to 192.168.0.1 )* open internet explorer Internet Explorer and connect to the cam by typing the following ip IP in the address bar: '''192.168.0.99'''* the cam webinterface should appear, login: '''admin ''' password: '''admin'''* to activate the video click you need to install a custom internet explorer Internet Explorer plugin. click ** Click 'download plugin' in center of interface (where video is supposed to be)** it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)** video of the cam should be on now ** (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)PART 2: set the cam to constantly auto tracking. this step is only neccessary with a brand new camgo to the tracking tab (top right corner, little walking man)use the arrow controls to make the cam point to the room (which would be straight down, if it hung vertically from a building)enable zoom, set to 8 or 10return 5 secondssave sceneenable tracking, 'on'the cam should be auto track movement now, test it.to avoid the caming going into parking position doing nothing we need to go into system settings

https://www== Set the Cam to constantly Auto-Tracking == * go to the tracking tab (top right corner, little walking man)* use the arrow controls to make the cam point to the room ** (which would be straight down, if it hung vertically from a building)* enable zoom, set to 8 or 10* return 5 seconds* save scene* enable tracking, 'on'* the cam should be auto track movement now, test it.miecctv.co.uk/downloads.html* to avoid the cam going into parking position doing nothing we need to go into system settings** go to the first tab in right panel, and save the current setting to scene 1** then go to left hand panel "system settings"** select 'PTZ' tab** set return to parking to 5 min** change 'do nothing' to 'call scene 1' <br>